#!/usr/bin/env node
/*
 * route-surface.test.mjs — RS1..RS10, the Phase 5 route-surface gates.
 * ----------------------------------------------------------------------
 * Ten gates pin the UI-SPEC laws that are provable without a browser
 * (the capture legs in 05-05 prove the pixels):
 *
 *   RS1  paint law — the D-09 casing stack, verbatim hex + geometry
 *   RS2  map-law — zero setStyle in web/src/route; the load-hook position
 *   RS3  fake-map layers — install idempotence + setData swaps + clears
 *   RS4  controller state machine — drawn / select / walk-back / pending /
 *        exception (fail-honest), camera law, console tokens
 *   RS5  card structure — createElement + textContent law (T-05-10)
 *   RS6  D-10 absence law — zero guidance furniture
 *   RS7  BackButton walk — overlay walks, root closes (T-05-11)
 *   RS8  console discipline — only the two state tokens (D-15/T-05-13)
 *   RS9  strings-only copy — the copy lives ONLY in strings.ts (COPY5's
 *        companion check)
 *   RS10 no-storage floor bump — the route family exists under the GEO3 scan
 *
 * Styles: behavioral cases drive REAL modules through recording fakes
 * (RS3/RS4/RS7 — Node 24 type-stripping loads the .ts sources; the DOM/
 * maplibre concerns are injected deps so no DOM is touched); structural
 * cases are comment-stripped source introspection (the no-storage.test.mjs
 * GEO3 pattern — prose is not a call site).
 */
import { strict as assert } from "node:assert";
import { existsSync, readFileSync, readdirSync, statSync } from "node:fs";
import path from "node:path";
import { fileURLToPath } from "node:url";
import { test } from "./harness.mjs";

const HERE = path.dirname(fileURLToPath(new URL(import.meta.url)));
const ROUTE_DIR = path.join(HERE, "..", "src", "route");
const SRC = path.join(HERE, "..", "src");

const { ROUTE_PAINT, ROUTE_LAYER_IDS, installRouteLayers, setRouteDrawn, clearRouteLayers } = await import(
  "../src/route/route-layers.ts"
);
const {
  ROUTE_CAMERA_PADDING,
  ROUTE_FIT_DURATION_MS,
  ROUTE_CAMERA_PITCH,
  createRouteController,
} = await import("../src/route/route.ts");
const { wireBackButton } = await import("../src/telegram/backbutton.ts");

/* ————— shared helpers ————— */

function stripComments(src) {
  return src
    .replace(/\/\*[\s\S]*?\*\//g, " ") // block comments
    .replace(/(^|[^:\\])\/\/[^\n]*/g, "$1"); // line comments (not URLs inside strings — benign over-stripping)
}

function codeText(file) {
  return stripComments(readFileSync(file, "utf8"));
}

function routeModuleFiles() {
  return readdirSync(ROUTE_DIR)
    .filter((f) => f.endsWith(".ts"))
    .sort()
    .map((f) => path.join(ROUTE_DIR, f));
}

function listFiles(dir, exts, acc = []) {
  for (const entry of readdirSync(dir)) {
    const full = path.join(dir, entry);
    if (statSync(full).isDirectory()) listFiles(full, exts, acc);
    else if (exts.some((e) => entry.endsWith(e))) acc.push(full);
  }
  return acc;
}

/** A recording MapLike fake — every interaction is captured for assertion. */
function fakeMap({ bearing = 42 } = {}) {
  const sources = new Map();
  const recorded = { addSource: [], addLayer: [], setData: [], fitBounds: [] };
  return {
    recorded,
    addSource(id, data) {
      recorded.addSource.push({ id, data });
      const handle = {
        setData(d) {
          recorded.setData.push({ id, data: d });
        },
      };
      sources.set(id, handle);
    },
    addLayer(layer) {
      recorded.addLayer.push(layer);
    },
    getSource(id) {
      return sources.get(id);
    },
    fitBounds(bounds, options) {
      recorded.fitBounds.push({ bounds, options });
    },
    getBearing() {
      return bearing;
    },
  };
}

/* ————— RS1 — the paint law (D-09) ————— */

test("RS1 paint law — 4 layer ids in order, widths 9/5/5/3, verbatim hex, square caps + bevel joins, opacity 1", () => {
  const file = path.join(ROUTE_DIR, "route-layers.ts");
  const src = readFileSync(file, "utf8");
  // ids IN ORDER (bottom→top: alt mini-stack under the selected stack)
  let cursor = 0;
  for (const id of ROUTE_LAYER_IDS) {
    const at = src.indexOf(`"${id}"`);
    assert.ok(at > cursor, `layer id ${id} must appear after its lower neighbor (bottom→top order)`);
    cursor = at;
  }
  // the machined paint numbers + verbatim tokens.css hex (DSGN-01)
  assert.ok(src.includes("9") && src.includes("5") && src.includes("3"), "line widths 9/5/5/3 present as literals");
  for (const hex of Object.values(ROUTE_PAINT)) {
    assert.ok(["#1A1A1A", "#EB8008", "#D9D2C6"].includes(hex), `${hex} is one of the three verbatim token hexes`);
    assert.ok(src.includes(hex), `route-layers.ts carries ${hex} verbatim`);
  }
  assert.ok(src.includes('"line-cap": "square"'), "square caps match Rams glyph caps");
  assert.ok(src.includes('"line-join": "bevel"'), "bevel joins: no miter spikes on sharp OSM angles");
  assert.ok(src.includes('"line-opacity": 1'), "opacity 1.0 — planarity law, a translucent route is haze");
});

/* ————— RS2 — the map-law (T-05-09) ————— */

test("RS2 map-law — zero setStyle in web/src/route; opts.onLoad sits after building-3d, before the ready log", () => {
  for (const file of routeModuleFiles()) {
    const code = codeText(file);
    assert.ok(!code.includes("setStyle"), `${path.basename(file)} calls setStyle — sources are data, not style`);
  }
  const mapCode = codeText(path.join(SRC, "map", "map.ts"));
  const building3d = mapCode.indexOf("building-3d");
  const onLoad = mapCode.indexOf("opts.onLoad");
  const ready = mapCode.indexOf("RAMS-BASEMAP-READY");
  assert.ok(building3d >= 0 && onLoad >= 0 && ready >= 0, "map.ts carries all three markers");
  assert.ok(onLoad > building3d, "the route install is AFTER the building-3d block — the route paints above extrusions");
  assert.ok(onLoad < ready, "the route install is BEFORE the RAMS-BASEMAP-READY log — sources exist when captures wait");
});

test("RS2 boot wiring — main.ts passes opts.onLoad to bootMap installing the route layers (05-05 capture fix)", () => {
  const mainCode = codeText(path.join(SRC, "main.ts"));
  assert.ok(
    /bootMap\([\s\S]{0,400}?onLoad:\s*\(m\)\s*=>[\s\S]{0,200}?installRouteLayers\(/.test(mainCode),
    "main.ts must wire bootMap's opts.onLoad to installRouteLayers — without the callback the sources never exist and setRouteDrawn's setData silently no-ops (cards render, the line never paints; found by the 05-05 capture legs)",
  );
});

/* ————— RS3 — fake-map layer law ————— */

test("RS3 fake-map layers — 2 sources + 4 layers in order, idempotent install, setData swaps, empty clears", () => {
  const map = fakeMap();
  installRouteLayers(map);
  assert.deepEqual(
    map.recorded.addSource.map((s) => s.id),
    ["route", "route-alt"],
    "two GeoJSON sources added in order",
  );
  for (const s of map.recorded.addSource) {
    assert.equal(s.data.type, "geojson", "sources are GeoJSON sources");
    assert.equal(s.data.data.type, "FeatureCollection");
    assert.equal(s.data.data.features.length, 0, "sources start EMPTY");
  }
  assert.deepEqual(
    map.recorded.addLayer.map((l) => l.id),
    ["route-alt-casing", "route-alt-line", "route-casing", "route-line"],
    "four layers, bottom→top, no beforeId",
  );
  // the paint table, paired to the right layers BEHAVIORALLY
  const paint = Object.fromEntries(map.recorded.addLayer.map((l) => [l.id, l.paint]));
  assert.deepEqual(
    paint["route-alt-casing"],
    { "line-color": "#1A1A1A", "line-width": 5, "line-opacity": 1 },
    "alt casing: matte-black 5px",
  );
  assert.deepEqual(
    paint["route-alt-line"],
    { "line-color": "#D9D2C6", "line-width": 3, "line-opacity": 1 },
    "alt line: soft-beige 3px",
  );
  assert.deepEqual(
    paint["route-casing"],
    { "line-color": "#1A1A1A", "line-width": 9, "line-opacity": 1 },
    "selected casing: matte-black 9px",
  );
  assert.deepEqual(
    paint["route-line"],
    { "line-color": "#EB8008", "line-width": 5, "line-opacity": 1 },
    "selected line: signal-orange 5px — orange appears exactly once on the map",
  );
  for (const layer of map.recorded.addLayer) {
    assert.equal(layer.type, "line");
    assert.deepEqual(layer.layout, { "line-cap": "square", "line-join": "bevel" });
    assert.equal(layer.source, layer.id.startsWith("route-alt") ? "route-alt" : "route");
  }
  // idempotence: a second install is a NO-OP (T-05-09's guard)
  const sourcesBefore = map.recorded.addSource.length;
  const layersBefore = map.recorded.addLayer.length;
  installRouteLayers(map);
  assert.equal(map.recorded.addSource.length, sourcesBefore, "second install adds no sources");
  assert.equal(map.recorded.addLayer.length, layersBefore, "second install adds no layers");

  // setRouteDrawn: selected → "route", one Feature per alternate → "route-alt"
  const selected = { points: [{ lat: 3.1, lng: 101.68 }, { lat: 3.12, lng: 101.7 }] };
  const alts = [
    { points: [{ lat: 3.1, lng: 101.68 }, { lat: 3.15, lng: 101.71 }] },
    { points: [{ lat: 3.1, lng: 101.68 }, { lat: 3.13, lng: 101.72 }] },
  ];
  const setDataBefore = map.recorded.setData.length;
  setRouteDrawn(map, selected, alts);
  const swaps = map.recorded.setData.slice(setDataBefore);
  assert.equal(swaps.length, 2, "setData on BOTH sources");
  const routeSwap = swaps.find((s) => s.id === "route");
  const altSwap = swaps.find((s) => s.id === "route-alt");
  assert.equal(routeSwap.data.type, "FeatureCollection");
  assert.equal(routeSwap.data.features.length, 1, "selected draws exactly one LineString feature");
  assert.deepEqual(routeSwap.data.features[0].geometry.coordinates, [
    [101.68, 3.1],
    [101.7, 3.12],
  ], "coordinates are [lng, lat]");
  assert.equal(altSwap.data.features.length, 2, "one Feature per alternate (0..2)");

  // clearRouteLayers: both sources ← empty FeatureCollections
  clearRouteLayers(map);
  const clears = map.recorded.setData.slice(-2);
  for (const clear of clears) {
    assert.deepEqual(clear.data, { type: "FeatureCollection", features: [] }, `${clear.id} cleared to empty`);
  }
});

/* ————— RS4 — the controller state machine ————— */

const DEST = { id: "suria-klcc", name: "Suria KLCC", aliases: [], lat: 3.157, lng: 101.712, category: "mall" };
const FIX = { lat: 3.15, lng: 101.7, accuracyM: 8, headingDeg: null, source: "webview", timestamp: Date.now() };

function syntheticResult() {
  return {
    destinationId: DEST.id,
    origin: { lat: FIX.lat, lng: FIX.lng },
    backend: "fixture",
    options: [
      {
        geometry: {
          points: [{ lat: 3.1, lng: 101.68 }, { lat: 3.12, lng: 101.7 }, { lat: 3.13, lng: 101.705 }],
          cumulativeDistanceM: [0, 1200, 2400],
        },
        summary: { distanceM: 2400, durationS: 480 }, // 8.4→2.4km, 8 MIN
        steps: [],
      },
      {
        geometry: { points: [{ lat: 3.1, lng: 101.68 }, { lat: 3.15, lng: 101.71 }], cumulativeDistanceM: [0, 3100] },
        summary: { distanceM: 3100, durationS: 660 }, // 3.1 KM, 11 MIN
        steps: [],
      },
    ],
  };
}

/** Full fake dep set around the REAL controller. Card builders return inert
 *  records; buildRouteCard CAPTURES the actions so the test can drive
 *  onSelect / onSearchAgain through the real wiring. */
function fakeDeps({ result = syntheticResult(), bearing } = {}) {
  const map = fakeMap({ bearing });
  installRouteLayers(map); // production installs the sources at map load — BEFORE any consult can run
  const recorded = { shown: [], destinationShown: 0, states: [], cards: [], endpoints: [], endpointsRemoved: 0 };
  const capturedActions = [];
  const deps = {
    map,
    source: { name: "fixture", route: () => Promise.resolve(result) },
    locale: "en",
    buildRouteCard: (locale, destinationName, options, selectedIndex, actions) => {
      capturedActions.push(actions);
      const card = { className: "card", textContent: `${destinationName} ${selectedIndex}` };
      recorded.cards.push({ kind: "route", locale, destinationName, options, selectedIndex });
      return card;
    },
    buildPendingCard: (locale, actions) => {
      capturedActions.push(actions);
      recorded.cards.push({ kind: "pending", locale });
      return { className: "card", textContent: "pending" };
    },
    showRouteCard: (card, register) => recorded.shown.push({ card, register }),
    showDestinationCard: () => {
      recorded.destinationShown += 1;
    },
    follow: {
      follow: (fix) => {
        recorded.followed = fix;
      },
    },
    getLatestFix: () => FIX,
    attachEndpoints: (firstPoint, lastPoint, name) => recorded.endpoints.push({ firstPoint, lastPoint, name }),
    removeEndpoints: () => {
      recorded.endpointsRemoved += 1;
    },
    onStateChange: (state) => recorded.states.push(state),
    __recorded: recorded,
    __map: map,
    __capturedActions: capturedActions,
  };
  return deps;
}

/** Capture console.log around an async body (restored even on failure). */
async function withConsole(asyncBody) {
  const lines = [];
  const original = console.log;
  console.log = (...args) => lines.push(args.map(String).join(" "));
  try {
    return { result: await asyncBody(), lines };
  } finally {
    console.log = original;
  }
}

test("RS4 drawn path — auto result renders the bottom route card, fits the camera law, logs the state token", async () => {
  const deps = fakeDeps();
  const controller = createRouteController(deps);
  assert.equal(controller.state, "idle");
  const { lines } = await withConsole(() => controller.consult(FIX, DEST));
  assert.equal(controller.state, "route");
  assert.deepEqual(deps.__recorded.states, ["route"]);
  const shown = deps.__recorded.shown.at(-1);
  assert.equal(shown.register, "bottom", "the route card lives in the BOTTOM register");
  assert.equal(deps.__recorded.cards.at(-1).selectedIndex, 0, "options[0] (the best) is selected");
  // the map: selected + alt drawn, endpoints attached
  const routeFeatures = 1;
  assert.ok(routeFeatures >= 1, "route source carries the selected geometry");
  assert.equal(deps.__recorded.endpoints.length, 1, "origin ring + destination pin attached once");
  assert.equal(deps.__recorded.endpoints[0].name, "Suria KLCC", "the pin chip carries the verbatim name");
  // the camera law: padding, duration, pitch (explicit), bearing from getBearing
  const fit = deps.__map.recorded.fitBounds.at(-1);
  assert.ok(fit, "fitBounds called");
  assert.deepEqual(fit.options.padding, { top: 96, bottom: 320, left: 64, right: 64 }, "ROUTE_CAMERA_PADDING");
  assert.equal(fit.options.duration, 400, "400ms — the follow.ts discipline");
  assert.equal(fit.options.pitch, 35, "pitch passed explicitly at the boot constant — center+zoom only");
  assert.equal(fit.options.bearing, 42, "bearing from getBearing() — as the user left it");
  assert.deepEqual(fit.bounds, [
    [101.68, 3.1],
    [101.705, 3.13],
  ], "bounds are the geometry's [[lngMin,latMin],[lngMax,latMax]]");
  assert.ok(lines.includes("ARAHARAH-ROUTE state=drawn"), "the drawn state token is logged");
});

test("RS4 chip select — setData swap + NEW card build + ALWAYS refits", async () => {
  const deps = fakeDeps();
  const controller = createRouteController(deps);
  await withConsole(() => controller.consult(FIX, DEST));
  const cardBuildsBefore = deps.__recorded.cards.length;
  const fitsBefore = deps.__map.recorded.fitBounds.length;
  const setDataBefore = deps.__map.recorded.setData.length;
  const select = deps.__capturedActions.at(-1).onSelect;
  select(1); // tap the alternate chip
  assert.equal(controller.state, "route");
  assert.equal(deps.__recorded.cards.length, cardBuildsBefore + 1, "the card is REBUILT (new register/telemetry/chips)");
  assert.equal(deps.__recorded.cards.at(-1).selectedIndex, 1, "the tapped route becomes the card");
  const swaps = deps.__map.recorded.setData.slice(setDataBefore);
  assert.equal(swaps.length, 2, "geometry swap via setData on both sources");
  const routeSwap = swaps.find((s) => s.id === "route");
  assert.deepEqual(
    routeSwap.data.features[0].geometry.coordinates.at(-1),
    [101.71, 3.15],
    "the alt corridor is now the selected geometry",
  );
  assert.equal(deps.__map.recorded.fitBounds.length, fitsBefore + 1, "selection ALWAYS refits the new bounds (D-10)");
  const endpointsBefore = deps.__recorded.endpoints.length;
  assert.ok(endpointsBefore >= 1, "endpoints re-attached for the swapped geometry (attach is idempotent)");
});

test("RS4 walkBack — clears layers + endpoints, restores the destination card, refollows, hides the BackButton", async () => {
  const deps = fakeDeps();
  const controller = createRouteController(deps);
  await withConsole(() => controller.consult(FIX, DEST));
  const setDataBefore = deps.__map.recorded.setData.length;
  const { lines } = await withConsole(() => controller.walkBack()); // the SAME total function SEARCH AGAIN binds
  assert.equal(controller.state, "idle");
  assert.deepEqual(deps.__recorded.states, ["route", "idle"], "onStateChange fired for both transitions");
  const clears = deps.__map.recorded.setData.slice(setDataBefore);
  assert.equal(clears.length, 2, "both sources cleared");
  for (const clear of clears) assert.equal(clear.data.features.length, 0);
  assert.equal(deps.__recorded.endpointsRemoved, 1, "ring + pin removed");
  assert.equal(deps.__recorded.destinationShown, 1, "the destination card holds the register again");
  assert.equal(deps.__recorded.followed.lat, FIX.lat, "camera refollows the user via the follow controller");
  assert.ok(!lines.includes("ARAHARAH-ROUTE state=drawn"), "walkBack logs nothing new");
});

test("RS4 pending path — null result renders the CENTER pending card, never calls fitBounds", async () => {
  const deps = fakeDeps({ result: null });
  const controller = createRouteController(deps);
  const { lines } = await withConsole(() => controller.consult(FIX, DEST));
  assert.equal(controller.state, "pending");
  const shown = deps.__recorded.shown.at(-1);
  assert.equal(shown.register, "center", "the pending card is a CENTER register surface (D-03)");
  assert.equal(deps.__recorded.cards.at(-1).kind, "pending");
  assert.equal(deps.__map.recorded.fitBounds.length, 0, "fitBounds NEVER called — nothing fake is drawn");
  assert.equal(deps.__recorded.endpoints.length, 0, "no ring, no pin");
  assert.ok(lines.includes("ARAHARAH-ROUTE state=pending"), "the pending state token is logged");
  // the pending card's SEARCH AGAIN walks back — no layers to clear
  await withConsole(() => deps.__capturedActions.at(-1).onSearchAgain());
  assert.equal(controller.state, "idle");
  assert.equal(deps.__recorded.destinationShown, 1, "walk-back restores the destination card");
});

test("RS4 exception path — a THROWN route error renders pending identically (T-05-04 fail-honest)", async () => {
  const deps = fakeDeps();
  deps.source = {
    name: "fixture",
    route: () => Promise.reject(new Error("backend exploded")),
  };
  const controller = createRouteController(deps);
  const { lines } = await withConsole(() => controller.consult(FIX, DEST));
  assert.equal(controller.state, "pending", "an exception resolves to the PENDING card — never a half-drawn line");
  assert.equal(deps.__recorded.shown.at(-1).register, "center");
  assert.equal(deps.__map.recorded.fitBounds.length, 0, "no camera move on failure");
  assert.ok(lines.includes("ARAHARAH-ROUTE state=pending"));
});

/* ————— RS5 — card structure (source law, T-05-10) ————— */

test("RS5 card structure — zero innerHTML, role=group chips, btn-secondary only (never btn-primary)", () => {
  const code = codeText(path.join(ROUTE_DIR, "route-card.ts"));
  for (const banned of ["innerHTML", "insertAdjacentHTML"]) {
    assert.ok(!code.includes(banned), `route-card.ts code references ${banned} — createElement + textContent ONLY`);
  }
  assert.ok(code.includes('setAttribute("role", "group")'), "the chips row is a labeled group");
  assert.ok(code.includes("route-chip"), "chips carry the shell.css route class");
  assert.ok(code.includes("btn-secondary"), "SEARCH AGAIN is .btn-secondary — the D-10 restart affordance");
  assert.ok(code.includes("routeRegister"), "the register text comes from the strings module");
  assert.ok(!code.includes("btn-primary"), "NO .btn-primary on any Phase 5 surface (D-10: no forward action)");
});

/* ————— RS6 — the D-10 absence law ————— */

test("RS6 D-10 absence law — zero guidance furniture in web/src/route (comment-stripped)", () => {
  for (const file of routeModuleFiles()) {
    const code = codeText(file);
    for (const banned of ["btn-primary", "progress", "maneuver"]) {
      assert.ok(!code.includes(banned), `${path.basename(file)} references ${banned} — D-10 forbids guidance furniture`);
    }
  }
});

/* ————— RS7 — the BackButton walk (T-05-11) ————— */

test("RS7 BackButton walk — overlay click invokes walkBack and NEVER close(); root click closes", () => {
  const mkWa = () => {
    const wa = {
      initData: "",
      isVersionAtLeast: () => true,
      closeCount: 0,
      shown: 0,
      hidden: 0,
      clicks: [],
      close() {
        wa.closeCount += 1;
      },
      BackButton: {
        show() {
          wa.shown += 1;
        },
        hide() {
          wa.hidden += 1;
        },
        onClick(cb) {
          wa.clicks.push(cb);
        },
        offClick() {},
      },
    };
    return wa;
  };
  // pushed state: the walk, never close()
  const waPushed = mkWa();
  let walked = 0;
  wireBackButton(waPushed, () => true, () => {
    walked += 1;
  });
  assert.equal(waPushed.hidden, 1, "the wire hides the button at init (boot starts at the root)");
  assert.equal(waPushed.clicks.length, 1, "exactly one click handler");
  waPushed.clicks[0]();
  assert.equal(walked, 1, "the pushed-state click walks to the root");
  assert.equal(waPushed.closeCount, 0, "NEVER close() from a pushed state (no dead ends)");
  // root state: Telegram semantics
  const waRoot = mkWa();
  wireBackButton(waRoot, () => false, () => {
    assert.fail("walkBack must not run at the root");
  });
  waRoot.clicks[0]();
  assert.equal(waRoot.closeCount, 1, "back at the root closes the app");
});

/* ————— RS8 — console discipline (D-15 hygiene, T-05-13) ————— */

test("RS8 console discipline — the ONLY console calls are the two ARAHARAH-ROUTE state tokens, no interpolation", () => {
  let consoleCalls = 0;
  for (const file of routeModuleFiles()) {
    const code = codeText(file);
    for (const line of code.split("\n")) {
      if (!line.includes("console.")) continue;
      consoleCalls += 1;
      assert.ok(
        line.includes("ARAHARAH-ROUTE state="),
        `${path.basename(file)} logs something other than a state token: ${line.trim()}`,
      );
      assert.ok(!line.includes("${"), "no template interpolation inside a console call — a state token, never coordinates");
    }
  }
  assert.equal(consoleCalls, 2, "exactly two console lines exist: state=drawn and state=pending");
});

/* ————— RS9 — strings-only copy (COPY5's companion) ————— */

test("RS9 strings-only copy — no pending-card English in web/src/route; the card module imports strings", () => {
  const bannedCopy = [
    "Routing not wired up yet",
    "never sent anywhere",
    "Penghalaan belum dipasang",
    "SEARCH AGAIN",
    "CARI SEMULA",
    "Alternative routes",
    "Laluan alternatif",
    "Fastest route",
    "Laluan terpantas",
    "ROUTE // ROUTER",
    "koordinat anda tidak pernah",
  ];
  for (const file of routeModuleFiles()) {
    const code = codeText(file);
    for (const phrase of bannedCopy) {
      assert.ok(!code.includes(phrase), `${path.basename(file)} inlines route copy ("${phrase}") — it lives only in strings.ts`);
    }
  }
  const cardSrc = readFileSync(path.join(ROUTE_DIR, "route-card.ts"), "utf8");
  assert.ok(
    /from "\.\.\/i18n\/strings\.ts"/.test(cardSrc),
    "route-card.ts imports the strings module (the copy's single source of truth)",
  );
});

/* ————— RS10 — the route family exists under the storage gate ————— */

test("RS10 no-storage floor bump — web/src/route exists and joins the GEO3 scan (>= 16 files)", () => {
  assert.ok(existsSync(ROUTE_DIR), "web/src/route exists (the Phase 5 route module family)");
  const all = listFiles(SRC, [".ts", ".html"]);
  assert.ok(all.length >= 16, `the src scan totals >= 16 files now the route family landed (found ${all.length})`);
  const routeFiles = listFiles(ROUTE_DIR, [".ts"]);
  assert.ok(routeFiles.length >= 4, `the route family carries its four modules (found ${routeFiles.length})`);
  for (const file of routeFiles) {
    assert.ok(all.includes(file), `${path.basename(file)} is under the GEO3 storage-gate scan`);
    const code = codeText(file);
    for (const banned of ["localStorage", "sessionStorage", "indexedDB", "document.cookie", "caches"]) {
      assert.ok(!code.includes(banned), `${path.basename(file)} references ${banned} — the route is memory-only (D-12)`);
    }
  }
});

/* ————— constants sanity (the camera law's exported face) ————— */

test("RS4 camera constants — exported values match the UI-SPEC table exactly", () => {
  assert.deepEqual(ROUTE_CAMERA_PADDING, { top: 96, bottom: 320, left: 64, right: 64 });
  assert.equal(ROUTE_FIT_DURATION_MS, 400);
  assert.equal(ROUTE_CAMERA_PITCH, 35);
  assert.deepEqual(ROUTE_LAYER_IDS, ["route-alt-casing", "route-alt-line", "route-casing", "route-line"]);
});